This page is planned to add content in the near future.
Please, hit "Vote" button if you interested in it, so we can know which pages must be filled out first of all. Up to 10 votes per day are accepted from one IP address
| Parameter | ST333C04CFL0 | ST333C04CFM0 | ST333C04LFL0 | ST333C04LFM0 | |
|---|---|---|---|---|---|
IC package | Package | TO-200AB (E-PUK) | TO-200AB, E-PUK | TO-200AB (E-PUK) | TO-200AC, B-PUK |
Manufacturer | Manufacturer | Vishay/Semiconductors | |||
Type of mounting a component on a board/circuit | Mount | On chassis/wire | |||
Repetitive peak off-state voltage | V | <400 V | |||
DC gate voltage required to trigger | VGT | <3 V | |||
Maximum average on-state current at case temperature | IT(AV) | <720 A | <720 A | <720 A | <620 A |
Maximum RMS on-state current | IT(RMS) | <1.435 kA | <1.435 kA | <1.435 kA | <1.23 kA |
DC gate current required to trigger | IGT | <200 mA | |||
Maximum holding current | IH | <600 mA | |||
Maximum peak, one-cycle non-repetitive surge current at 10ms (50Hz) | ITSM/50Hz | <11 kA | |||
Maximum peak, one-cycle non-repetitive surge current at 8.3ms (60Hz) | ITSM/60Hz | <11.5 kA | |||
SCR type | Type | Standard Recovery | |||