S6X8ES

S6X8, S6X8BSRP, S6X8ES, S6X8ES1, S6X8ES1AP, S6X8ES1RP, S6X8ES2, S6X8ES2AP, S6X8ES2RP, S6X8ESAP, S6X8ESRP, S6X8TS1RP, S6X8TS2RP, S6X8TSRP

This page is planned to add content in the near future.

Please, hit "Vote" button if you interested in it, so we can know which pages must be filled out first of all. Up to 10 votes per day are accepted from one IP address

Description

Parameters

ParameterS6X8BSRPS6X8ESS6X8ES1S6X8ES1APS6X8ES1RPS6X8ES2S6X8ES2APS6X8ES2RPS6X8ESAPS6X8ESRPS6X8TS1RPS6X8TS2RPS6X8TSRP
IC package
Package
SOT-89TO-92-3 (Standard Body), TO-226TO-92-3 (Standard Body), TO-226TO-92-3 (Standard Body), TO-226TO-92TO-92-3 (Standard Body), TO-226TO-92-3 (Standard Body), TO-226TO-92TO-92-3 (Standard Body), TO-226TO-92-3 (Standard Body), TO-226SOT-223 (3 leads + Tab), SC-73, TO-261AASOT-223 (3 leads + Tab), SC-73, TO-261AASOT-223 (3 leads + Tab), SC-73, TO-261AA
Manufacturer
Manufacturer
Littelfuse / Teccor Brand Thyr
Type of mounting a component on a board/circuit
Mount
Surface mountThrough-holeThrough-holeThrough-holeThrough-holeThrough-holeThrough-holeThrough-holeThrough-holeThrough-holeSurface mountSurface mountSurface mount
Repetitive peak off-state voltage
VDRM/VRRM
<600 V
DC gate voltage required to trigger
VGT
<800 mV
Maximum average on-state current at case temperature
IT(AV)
<510 mA
Maximum RMS on-state current
IT(RMS)
<800 mA
DC gate current required to trigger
IGT
<200 µA<200 µA<5 µA<5 µA<5 µA<50 µA<50 µA<50 µA<200 µA<200 µA<5 µA<50 µA<200 µA
Maximum holding current
IH
<5 mA
Maximum peak, one-cycle non-repetitive surge current at 10ms (50Hz)
ITSM/50Hz
<8 A
Maximum peak, one-cycle non-repetitive surge current at 8.3ms (60Hz)
ITSM/60Hz
<10 A
SCR type
Type
Sensitive Gate