This page is planned to add content in the near future.
Please, hit "Vote" button if you interested in it, so we can know which pages must be filled out first of all. Up to 10 votes per day are accepted from one IP address
| Parameter | S4010VS2 | S4010VS2TP | S4010VS3 | S4010VS3TP | S4010VTP | |
|---|---|---|---|---|---|---|
IC package | Package | IPak, TO-251, DPak, VPak (3 straight leads + tab) | ||||
Manufacturer | Manufacturer | Littelfuse / Teccor Brand Thyr | ||||
Type of mounting a component on a board/circuit | Mount | Through-hole | ||||
Repetitive peak off-state voltage | V | <400 V | ||||
DC gate voltage required to trigger | VGT | <800 mV | <800 mV | <800 mV | <800 mV | <1.5 V |
Maximum average on-state current at case temperature | IT(AV) | <6.4 A | ||||
Maximum RMS on-state current | IT(RMS) | <10 A | ||||
DC gate current required to trigger | IGT | <200 µA | <200 µA | <500 µA | <500 µA | <15 mA |
Maximum holding current | IH | <6 mA | <6 mA | <8 mA | <8 mA | <30 mA |
Maximum peak, one-cycle non-repetitive surge current at 10ms (50Hz) | ITSM/50Hz | <83 A | ||||
Maximum peak, one-cycle non-repetitive surge current at 8.3ms (60Hz) | ITSM/60Hz | <100 A | ||||
SCR type | Type | Sensitive Gate | Sensitive Gate | Sensitive Gate | Sensitive Gate | Standard Recovery |